Aqui dejamos el firmware para el Bmobile AX1078 en formato para Infinity CM2 SPD.
Utiliza este firmware para reparar errores de sistema, cambio de Firmware, revivir teléfonos apagados.
Compatible solo con Infinity Dongle CM2.
Para renovar el año de soporte, te invitamos a comprarlo en nuestra web al mejor precio.
Contraseña: fastnck.com
Si te funcionó o te da fallo, deja un comentario.
hola buenos días tengo problemas con el proceso de flash
Operation : Identify [ v2.11 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Product Name : AX1078_TG06
Product Device : Bmobile_AX1078_TG06
Product Brand : Bmobile
Product Model : AX1078
Patch Level : QP1A.190711.020
Display ID : Bmobile_AX1078_TIGO_LTM_V001
Ver. Incmt : 43319
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-09-01
Build Time : 24.11.2020
Product Info : AX1078
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Manfct : Bmobile
Platform Version: MOCORTM_18A_W20.31.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.31.2
HW Version: sc9832e_modem
CMP_Time : 07-28-2020 20:36:20
MODEM TAG : MOCORTM_18A_W20.31.2_Debug_FM_BASE_18A_W20.31.2_sc9832e_modem_sharkle_Smart_Phone
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***) ——-[este es el problema y no me deja hacer flasheo]
– > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:01:44
En el software de Infinity CM2 Sp2 selecciona esta configuracion:
CPU: SC9832E_BASE
MODEL: SC9832E_eMMC_1GB_SS
aqui nuevamente con otro error
Operation : Flash Firmware [ v2.11 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x27
PMTMng : Update failed!
ERROR : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!
>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process
Reconnect Power/Cable!
Revisa hardware. El firmware esta probado, has un identify en dejalo aqui en los comentarios.
Saludos
ESTE ERROR ME SIGUE TIRANDO DESPUES DE HACER IDENTIFY
Operation : Identify [ v2.11 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Product Name : AX1078_TG06
Product Device : Bmobile_AX1078_TG06
Product Brand : Bmobile
Product Model : AX1078
Patch Level : QP1A.190711.020
Display ID : Bmobile_AX1078_TIGO_LTM_V001
Ver. Incmt : 43319
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-09-01
Build Time : 24.11.2020
Product Info : AX1078
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Manfct : Bmobile
Platform Version: MOCORTM_18A_W20.31.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.31.2
HW Version: sc9832e_modem
CMP_Time : 07-28-2020 20:36:20
MODEM TAG : MOCORTM_18A_W20.31.2_Debug_FM_BASE_18A_W20.31.2_sc9832e_modem_sharkle_Smart_Phone
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***) ——-[este es el problema y no me deja hacer flasheo]
– > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:01:44
Esta genial el post. Reciba un cordial saludo.
se realizo todo el proceso de flasheo, pero queda en fastboot mode, no enciende